Tools and materials you’ll need
Before we dive in, let’s make sure you’ve got all the essentials:
Corner trunking: Pick the right size and type for your project.
Measuring tape: Accurate measurements are key.
Saw or trunking cutter: For those clean, precise cuts.
Adhesive or screws: Depending on your wall type.
Screwdriver or drill: To fasten the trunking securely.
File or sandpaper: To smooth out any rough edges for a polished finish.
Step-by-step installation guide
Plan your route: Measure the path where your trunking will go. Mark it clearly, avoiding any obstacles along the way.
Cut the trunking: With your saw or cutter, trim the trunking to the lengths you need. Don’t forget to factor in those corners!
Prepare the corners: Corners can be tricky, but don’t worry. Cut carefully and smooth the edges with your file for a perfect fit.
Install the trunking: Apply adhesive or use screws to fix the trunking in place. Start at one end and work along the path, pressing firmly to secure.
Insert cables: Now, run your cables through the trunking. Keep them organised to avoid any tangles or overlaps.
Snap on the lid: Secure the lid onto the trunking. It should click into place, keeping everything protected and looking sharp.
Final check: Inspect your work to make sure there are no gaps or loose sections. Adjust as needed to ensure everything is secure and up to code.
Pro tips for a high quality finish
Pre-bend for tight corners: Pre-bending the trunking can help it fit better in tight corners.
Use grommets: Where cables enter or exit the trunking, use grommets to prevent wear.
Test fit: Always do a dry fit before securing everything permanently.
Watch out for these common pitfalls
Don’t overload: Overfilling the trunking can lead to overheating—keep it cool by not cramming too many cables inside.
Measure twice, cut once: Double-check your measurements to avoid cutting errors.
Keep it neat: A clean installation isn’t just functional—it’s also about looking professional.